Resetting The Password - Pioneer Elite PureVision PRO 1110HD Operating Instructions Manual

12 Useful Adjustment Settings

Resetting the password

1
Press HOME MENU.
2
Press / to select "Setup", and then press
ENTER.
3
Press / to select "Password", and then press
ENTER.
• The password entry screen appears. Enter your
4-digit password using buttons 0 – 9.
4
Press / to select "Reset", and then press
ENTER.
5
Press / to select "Yes", and then press ENTER.
6
Press HOME MENU to exit the menu.
• The above procedure will reset the password to the
factory default (1234).
Cut along the dotted line and file after reading and filling out.
We suggested you write down your password so you don't forget it.
PRO-1110HD/PRO-910HD
Your password No.:
96
En
PDP-ELITE-Eng (81-96)
PLASMA DISPLAY
Resets password.
No
Yes
96
If you forget the password
When the message "Please Input Your Password" is
displayed in step 3 above, press the ENTER button on the
remote control unit and hold it down for 3 seconds or
longer.
The password reverts to "1234".
9/9/03, 11:47