Error Messages - Pioneer S-DV9 Operating Instructions Manual

Additional information
Problem
No sound from the
wireless speaker.
Horizontal stripe noise
interference on a TV set
near the transmitter.
The POWER indicator
goes out when the switch
is on or the system is in
operation.

Error Messages

Message
Child Lock
Rec Mode On
Phones In
96k Stereo
No Surr. SP
Normal / Wide / Left Side/
Right Side / W. Stereo
Muting
Exit
SR+ Error
Remedy
• If you selected W.Stereo, the volume on the wireless speaker may be
turned down too low.
• If there a piece of A/V equipment with an antenna near the transmitter,
move the transmitter away from the antenna input terminal of the AV
equipment.
• It is likely that the system is malfunctioning. Ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
Description
• This message appears when the front panel buttons are pressed when
the child lock feature is active. See Child lock setting on page 74 for more
on switching on/off the child lock.
• Blinks rapidly for 2 seconds when an operation is prohibited because
the Recording Mode is on (see Recording mode on page 82).
• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
• Blinks rapidly for 2 seconds when an operation is prohibited because
the source is digital 88.2 or 96kHz PCM.
• Blinks rapidly for 2 seconds when an operation is prohibited because
there is no surround speaker output.
• Blinks rapidly for 2 seconds when an operation is prohibited due to the
wireless speaker setting.
• Blinks rapidly for 2 seconds when an operation is prohibited because
the sound is muted (press the MUTE button to turn the sound on).
• Appears briefly when a menu is automatically exited after a set period of
inactivity.
• Appears when there is a communication problem between the unit and
the plasma display. Check all connections and retry.
12
87
En