Getting Started; Switching On And Setting Up - Pioneer S-DV9 Operating Instructions Manual

Getting started

Chapter 4
Getting started

Switching on and setting up

After making sure everything is connected up
properly, you're ready to switch on. The first
thing to do is to tell the system what kind of TV
you're using, standard or widescreen.
After that you can set up the surround sound
for your room, and set the clock so that you can
use the timer features.
STANDBY/ON
SYSTEM SETUP
SHIFT
ROOM
SETUP
ENTER
TIMER
ENTER
1 Press STANDBY/ON (on the remote or
on the front panel) to switch the system
on.
Also make sure that your TV is switched on and
that the video input is set to this system. You
should see the welcome screen displayed.
Welcome to Pioneer DVD!
Thank you for purchasing this Pioneer DVD player.
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
Next, press the [ENTER] button on the remote control
and start the Let's Get Started Menu
Next
2 Press ENTER to move on to the next
screen.
3 Use the (cursor left/right) buttons
to select either 'Wide screen' or 'Standard
size screen' according to the kind of TV you
have, then press ENTER.
See also Screen sizes and disc formats on
page 88 if you're not sure which one to choose.
Let's Get Started Menu
What kind of TV do you have?
Use the /
to choose, then press ENTER
Wide screen (16:9)
cursor buttons
Standard size screen (4:3)
04
31
En