Wall-Mounting The Center Speaker - Pioneer S-DV9 Operating Instructions Manual

Connecting up
• Make sure that all speakers are securely
installed (if you choose to install the center
speaker on top of the TV, be sure to secure
it by suitable means). This not only
improves sound quality, but also reduces
the risk of damage or injury resulting from
speakers being knocked over or falling in
the event of external shocks such as
earthquakes.
• The front and center speakers supplied
with this system are magnetically shielded.
However, placing them extremely close to
a television may result in color distortion
on the screen. If this happens, move the
speakers a little further away and switch off
the television for 15–30 minutes.
• The subwoofer is not magnetically shielded
and so should not be placed near a TV or
monitor.
• For a greater surround sound effect from
the wireless speaker, see Setting the
channel levels on page 67 to increase the
surround channel levels.
• As well as setting the wireless mode on the
speakers, you must also set the mode on
the main unit. See Using the wireless
speaker system on page 42 for more on
this.

Wall-mounting the center speaker

Before mounting
• Remember that the speaker system is
heavy and that its weight could cause the
wood screws to work loose, or the wall
material to fail to support it, resulting in the
speaker falling. Make sure that the wall you
intend to mount the speakers on is strong
enough to support them. Do not mount on
plywood or soft surface walls.
• Mounting screws are not supplied. Use
screws that are suitable for the wall
material and that will support the weight of
the speaker.
Wood screw
Protrusion: 5-7mm
• If you are unsure of the qualities and
strength of the walls, consult a
professional for advice.
• Pioneer is not responsible for any
accidents or damage that result from
improper installation.
02
5 mm
10 mm
15
En