Pioneer DVR-530H-S Operating Instructions Manual page 97

The Initial Setup menu
Setting Options
Still Picture Field
Frame
Auto •
Seamless Playback On
Off •
Parental Lock Set Password
Change Password
Change Level
Country/Area Code
Only certain discs have parental lock and country code features. Check the disc packaging to see what features the disc has. If you forget your
password you can reset it by resetting the recorder to its factory settings. See Resetting the recorder on page 99.
Angle Indicator On •
Off
Options
On-Screen Display On •
Off
Front Panel Display On •
Off
Remote Control Mode Recorder 1–3
(default: Recorder 1)
USB Restart USB Device
Confirm Printer
Explanation
Produces a stable, generally shake-free image.
Produces a sharper image, but more prone to shake than Field stills.
The recorder automatically selects Field or Frame type still, according
to the material playing.
Playback is smooth, but with a trade-off against the accuracy of the
edit points.
You may notice momentary interruption at edited points during play-
back of a VR mode Play List.
In order to change the parental lock level or change the country/area
code, set the password using this option. From the following screen,
enter a four-digit number that will be your password.
In order to change the password, first enter your existing password
and then a new one from the following screen.
From the following screen, first enter your password and then set a
parental lock level.
From the following screen, first enter your password and then set a
country/area code.
A camera icon appears on-screen during multi-angle scenes on a
DVD-Video disc.
Nothing is indicated on-screen when a multi-angle scene is showing.
The recorder displays operation displays (Stop, Play, etc.) on-screen.
Switches off the on-screen operation displays.
The time is shown in the front panel display when the recorder is in
standby.
The front panel display is switched off in standby (although it still lights
dimly when setting a timer recording).
If you are using more than one recorder in the same room, set them to
different IDs. This setting sets the recorder ID; to change the remote
controller ID, press and hold RETURN then press 1, 2 or 3 to set. The
remote will only control a recorder with the same ID.
If the connected USB device does not respond to the recorder, try
using this option to restart it. If the device still does not work properly
try switching it off then back on, and/or disconnecting then reconnect-
ing the USB cable.
Use this option to confirm the make and model of the printer con-
nected to the recorder (does not work with all printers).
13
97
En