Getting Started; Switching On And Setting Up - Pioneer DVR-320 Operating Instructions Manual

Getting started

Chapter 4
Getting started

Switching on and setting up

When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator feature. This takes you through setting the
clock, the internal TV tuner and the video and audio
output settings.
If you're using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
STANDBY/ON
DVD RECORDER
ENTER
1 Switch on your TV and set the video input to this
recorder.
2 Press the STANDBY/ON button on the remote
control or the front panel to switch on.
When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn't appear, you can also access it from the
Initial Setup menu; see page 79).
• If this recorder is connected to a compatible TV using
a fully-wired 21-pin SCART cable, the recorder will
take a few seconds to download country, TV screen
size and language information. (Check the manual
that came with your TV for compatibility information.)
3 Use the (cursor up/down) buttons to choose
a language, then press ENTER.
Initial Setup
Language
Basic Clock Set
Tuner Input Line System
Video In/Out On Screen Display
Audio In
Front Panel Display
Audio Out
Power Save
Language
Remote Control Set
Recording Setup Navigator Setup Navigator
Playback
4 Press ENTER to start setting up using the Setup
Navigator.
Initial Setup
Basic Clock Set
Complete this setup before you
Tuner Input Line System
start using your recorder.
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Power Save
Language Remote Control Set
Please use the Initial Setup if you
Recording Setup Navigator Setup Navigator
want to make more detailed settings.
Playback
• If you don't want to use the Setup Navigator, press
(cursor down) to select Cancel, then press ENTER to
exit the Setup Navigator.
5 Select the Auto Channel Setting ('Auto Scan' or
'Download from TV'), or 'Do not set', then press
ENTER.
Initial Setup
Auto Channel Setting
Basic Clock Set
Tuner Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Power Save
Language Remote Control Set
Recording Setup Navigator Setup Navigator
Playback
English
français
Deutsch
Italiano
Español
Start
Cancel
Auto Scan
Download from TV
Do not set
04
25
En