Easy Connections - Pioneer DVR-320 Operating Instructions Manual

02 Connecting up

Easy connections

The setup described below is a basic setup that allows you to watch and record TV programs, and play discs. Other
types of connections are explained starting on the following page.
Important
• These connections use SCART cables (not supplied). If your TV (or VCR) does not have a SCART connection, see
the following page for connecting up using the supplied audio/video cable.
• The AV1(RGB)-TV AV connector can output ordinary (composite), S-video or RGB video, plus stereo analog audio.
The AV2/AUTO START REC (INPUT 1/DECODER) connector accepts ordinary, S-video and RGB video input, as
well as stereo analog audio. See AV1 Out on page 82 and AV2/L1 In on page 82 for how to set them up.
• Before making or changing any rear panel connections, make sure that all components are switched off and
unplugged from the wall outlet.
ANTENNA
IN
3
4
TV
ANTENNA
OUT IN
R L
AUDIO
VIDEO
S-VIDEO
OUTPUT
2
ANTENNA
OUT
VCR
Antenna/cable TV
wall outlet
14
En
SCART AV
CONNECTOR
IN OPTICAL
AV 1 (RGB) - TV AV 2/AUTO START REC
(INPUT 1/DECODER) CONTROL DIGITAL OUT
5
SCART AV
CONNECTOR
ANTENNA
IN
1
1 Connect the cable from the antenna/cable TV
outlet to the antenna input on your VCR.
• If you are not connecting a VCR in the chain, connect
it to the ANTENNA IN jack on this recorder and skip
the next step.
2 Use an RF antenna cable (one is supplied) to
connect the antenna output of your VCR to the
ANTENNA IN of this recorder.
3 Use another RF antenna cable to connect the
ANTENNA OUT of this recorder to the antenna input
on your TV.
AC IN
4 Use a SCART cable (not supplied) to connect the
AV1(RGB)-TV AV connector on this recorder to the
SCART AV connector on your TV.
5 Use another SCART cable to connect the AV2/
AUTO START REC (INPUT 1/DECODER) AV connector
to a SCART AV connector on your VCR.
Note
• See the following page if you want to use one of the
other kinds of audio/video connection.
Tip
• This recorder has a 'through' function which allows
you to record a TV program from the built-in TV tuner
in this recorder while watching a video playing on
your VCR. (To use this feature when the recorder is in
standby, Power Save must be set to Off—see Power
Save on page 78).