Set Rds Clock; Usb; Play Music - Philips CE600N User Manual

Note
•
If the currently received TA signal remains
weak for over 120 seconds, the unit will
activate TA Seek mode automatically to
seek for other stations with better TA signal.
Tip
•
When a traffic announcement cuts in, the
user can press
traffic announcement, and the unit will
resume to the previous playback mode.

Set RDS clock

You can use time signal that is
broadcast together with the RDS
signal to set the clock of the unit
automatically.
1
Tap >
2
Tap , to select a setting:
•
: Turn on the RDS clock.
Time shown on the unit
synchronizes with that on the
RDS station.
•
: Turn off the RDS clock.
Tip
•
The accuracy of the transmitted time
depends on the RDS station that transmits
the time signal.
EN
12
briefly to terminate the
.

7 USB

On the unit, you can play the media files
that you have stored on a USB storage
device.
1
Connect your USB storage device to
the unit.
2
Press to enter the Home screen.
Tap .
» Media files are sorted as
follows:
: Display music files/ folders.
: Display picture files/ folders.
: Display video files/ folders.
3
Select a file to start play.

Play music

» On the play screen, you can see the
file information and play status.