Backing Up The Configuration - HP 16Gb SAN User Manual

number of installed POD licenses.
to allow these ports to be reassigned.]
Ports assigned to the second POD license:
None
Ports not assigned to a license:
0, 10, 12, 15, 16, 19, 21, 22, 23, 24, 27
0 license reservations are still available for use by unassigned ports
1 license assignment is held by an offline port (indicated by *)
Bulova2_13_pilot:root>
Example for Brocade 8/24 SAN Switch
cp081044:admin> licenseport --show
24 ports are available in this switch
Full POD license is installed
Dynamic POD method is in use
24 port assignments are provisioned for use in this switch:
12 port assignments are provisioned by the base
12 port assignments are provisioned by a full POD license
11 ports are assigned to installed licenses:
11 ports are assigned to the base switch license
0 ports are assigned to the full POD license
Ports assigned to the base switch license:
1, 2, 3, 4, 5, 6, 7, 8, 17*, 18*, 19*
Ports assigned to the full POD license:
None
Ports not assigned to a license:
0, 9, 10, 11, 12, 13, 14, 15, 16, 20, 21, 22, 23
13 license reservations are still available for use by unassigned
ports
3 license assignments are held by offline ports (indicated by *)
NOTE: The DPOD feature does not consider disabled ports as candidates for license assignments.
You can persistently disable an otherwise enabled port to cause it not to come online and preserve
a license assignment for future use.

Backing up the configuration

To back up the switch configuration to an FTP server, enter configupload and follow the prompts.
The configupload command copies the switch configuration to the server, making it available
for downloading to a replacement switch, if necessary.
Use licensePort -release
Configuring the 16Gb SAN Switch 19