Installing/Removing The Cable - NEC ExpEther-2S User Manual

3.4 Installing/Removing the cable

Installation
Insert the cable into the QSFP slot of the ExpEther IO Expansion Unit (40G).
1.
Important Insert the cable until it clicks.
Removal
Hold the handle of the cable from the QSFP slot of the ExpEther IO Expansion Unit (40G) and
1.
pull out the cable horizontally to the arrow direction.
Important Be sure to pull the handle of the cable horizontally.
If you pull out the other part or pull out the cable to other directions, you may
damage the unit and the cable.
Handle
11