Expetherconfig Tool; Installation And Uninstallation - NEC ExpEther-2S User Manual

4.2 ExpEtherConfig tool

The ExpEtherConfig tool includes the following functions for the ExpEther board (40G) mounted on
the server.
 Output the information of the ExpEther board (40G)
 Set the information (host information) to identify the server to the ExpEther board
NEC ESMPRO Manager uses the host information set on the ExpEther board to link the ExpEther
board to the server that mounts it. You need to set the model name and the serial number of the
server to the ExpEther board (40G) mounted on trhe server by using the ExpEtherConfig tool to
manage the ExpEther board by NEC ESMPRO Manager.
OS's supporting the tool is shown below.
OS
4.2.1 Installation and uninstallation (Windows version）
(1) Installation
Installation of ExpEtherConfig also installs the PlxSvc driver. If the PlxSvc
Tip driver has been installed, it is not installed. Stop the PlxSvc service and
uninstall the PlxSvc driver in advance.
Contact your sales representative for the installation media of ExpEtherConfig Tool.
Sign in (Log on) with the built-in Administrator (or an account with the administrative right).
i
Start the setup program "setup.exe" of the ExpEtherConfig tool.
ii
The "setup.exe" is stored in the installer directory extracted from
ExpEtherConfigTool_Win_x64.zip.
iii "Choose Setup Language" screen is displayed. Select English and click "OK". Click "Cancel"
to finish installation.
Windows Server 2012 R2 (x64 UEFI)
Red Hat Enterprise Linux 6 (x64 UEFI)
Red Hat Enterprise Linux 7 (x64 UEFI)
56