Mounting The Expether Io Expansion Unit (40G) On The Rack - NEC ExpEther-2S User Manual

3.6.2 Mounting the ExpEther IO Expansion Unit (40G) on the rack

You can mount the ExpEther IO Expansion Unit (40G) on a 19-inch rack by using the N8140-820
general-purpose tray and the N8143-121 ExpEther (40G) rack mount kit. You can mount up to 3
ExpEther IO Expansion Units (40G) per N8140-820 general-purpose tray and N8143-121 ExpEther
(40G) rack mount kit.
The procedure to mount the ExpEther IO Expansion Unit (40G) is described below.
(The illustration shows the ExpEther IO Expansion Unit (40G)-4S.)
Refer to the setup guide of the general-purpose tray for mounting the N8140-820 general-purpose
tray on a 19-inch rack.
Installing a bracket on the unit
1.
Install a front bracket on the front of the ExpEther IO Expansion Unit (40G) and install a rear
bracket on the back.
Front
Rear
Front Bracket
Screw: Fix it with 2 screws (M3x8).
Screw: Fix it with 2 screws (M3x8).
18
Rear Bracket