Dust Cover Disassembly; Speaker Disassembly - Motorola CP150 Basic Service Manual

Radio Disassembly — Detailed

2.5.2 Dust Cover Disassembly

a. Gently pry the top of the dust cover away from the body of the radio. (See Figure 2-4.)
b. Rotate the dust cover 90° in a counter clockwise direction to allow the key to be
removed.
c. Separate the dust cover away from the body of the radio. The dust cover key is fragile;
apply only light pressure to the key while removing the dust cover.
a. Pry dust cover from body.

2.5.3 Speaker Disassembly

NOTE: The speaker is held in place with a retainer bracket. Be careful not to damage the speaker
when removing the retainer bracket.
1. Remove the two screws from the speaker retainer using a T6 Torx screwdriver.
2. Lift the speaker out from the front housing.
Wire Connector
b. Rotate dust cover 90
allow key to be removed.
Figure 2-4.
Speaker
Figure 2-5. Removal Speaker-Microphone Assembly
°
to
Dust Cover Removal
Retainer Bracket
c. Separate dust
cover from body.
Radio Housing
2-5
k y
e