Pioneer DV-989AVi-G Operating Instructions Manual page 92

09 Additional information
Problem
No HDMI video output
No multichannel HDMI
audio.
A connected HDMI
component doesn't work
with this player.
Color problems occur with
your monitor after changing
the Video Adjust (page 55),
Video Memory (page 70).
92
En
Remedy
• Make sure that you've selected this player as the HDMI input in the
settings for the component you're using. You may need to refer to the
instruction manual of the component to do this.
• It is not possible to output SACD sources from the HDMI
connection.
• Check that the HDMI cable is connected properly and that the cable
isn't damaged.
• Check that components connected using the HDMI interface are
switched on and HDMI compatible. (
be made with components compatible with both DVI and High
Bandwidth Digital Content Protection (HDCP).)
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface) Version 1.1. Depending on the
component you have connected, unreliable signal transfers may
result.
PURE AUDIO
• Check that the
PURE AUDIO
button (
• Make sure the resolution on this player matches that of the
component you have connected using HDMI. See HDMI Settings
to change the HDMI resolution.
on page 68
• Make sure the Audio setting in the HDMI menu is set to Auto (see
HDMI Settings on page 68 to do this).
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface) Version 1.1. Depending on the
component you have connected, using a DVI connection may
result in unreliable signal transfers.
• You can correct this by choosing an input setting on your monitor
according to the setting you've selected (see the table in the note
following Video Memory on page 70).
An HDMI connection can only
indicator is not lit. If it is, press the
See also Front panel on page 23).