Basic Playback Controls; Resume And Last Memory - Pioneer DV-696AV-S Operating Instructions Manual

Getting started

Basic playback controls

The table below shows the basic controls on
the remote for playing discs. The following
chapter covers other playback features in more
detail.
Button What it does
Starts playback.
If the display shows RESUME or LAST
MEM playback starts from the
resume or last memory point (see
also Resume and Last Memory below.)
Pauses a disc that's playing, or
restarts a paused disc.
Stops playback.
See also Resume and Last Memory
below.
Press to start fast reverse scanning.
(remote Press (play) to resume normal
only)
playback.
Press to start fast forward scanning.
(remote
Press (play) to resume normal
only)
playback.
Skips to the start of the current track,
title or chapter, then to previous
tracks/titles/chapters.
Skips to the next track, title or
chapter.
Numbers
Use to enter a title/chapter/track
(remote
number. Press
only)
• If the disc is stopped, playback
starts from the selected title (for
DVD), group (for DVD-Audio) or track
(for CD/SACD/Video CD
• If the disc is playing, playback
jumps to the start of the selected title
(VR mode DVD-RW), chapter (DVD-
Video) or track (DVD-Audio*/SACD/
CD/Video CD/Super VCD).
*within the current group
ENTER
to select.
).
/Super VCD

Resume and Last Memory

With the exception of DVD-Audio and SACD
discs, when you stop playback of a DVD, CD,
Video CD/Super VCD or DivX video discs,
RESUME is shown in the display indicating
that you can resume playback again from that
point.
If the disc tray is not opened, the next time you
start playback the display shows RESUME and
playback resumes from the resume point. (If
you want to clear the resume point, press
(stop) while RESUME is displayed.)
With DVDs and Video CD/Super VCDs, if you
take the disc out of the player after stopping
playback, the last play position is stored in
memory. If the next disc you load is the same
one, the display shows LAST MEM and
playback will resume. For DVD-Video discs,
the player stores the play position of the last
five discs. When one of these discs is next
loaded, you can resume playback.
Note
• The Last Memory function doesn't work
with VR format DVD-RW, DVD-Audio or
SACD discs.
• If you don't need the Last Memory function
when you stop a disc, you can press
OPEN/CLOSE to stop playback and open
the disc tray.
04
23
En