Basic Playback Controls - Pioneer DV-C505 Operating Instructions Manual

(Getting Started
l
/ have a standard (4:3) TVand set the
player fo show widescreen DVDs in pan &
scan format, so why do I still get black
bars top and boffom wifh some discs?
Some discs override the display
preferences of the player, so even if you
have 4:3 (Pan 81 Scan) selected, those
discs will still be shown In letterbox
format. This is not a malfunction.
l
My AV receiver 1s definite/y compafibie
with 96kHz Linear PCM audio, but if
doesn'f seem fo work with this player:
What's wrong?
For drgital copy-protection purposes,
some 96kHz DVD discs are
automatically downsampled to 48kHz.
This is not a malfunction. With these
kinds of discs, if you want to enjoy high-
quality analog audio, set Digital Out to
Off (page 46), and 96kHz PCM Out to
96kHz (page 47).
l
Can't play DVD or Video CDs loaded
The player IS in CD mode. Press CD
MODE to cancel. (page 29).
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. The folllowing
chapter covers more playback features in
more detail.
Starts playback.
DVD and Video CD: if the
display shows RESUME,
playback starts from the
resume point.
II
Pauses a disc that's playing,
or restarts a paused disc.
n
Stops playback.
DVD and Video CD: Display
shows RESUME. Press
n
(stop) again to cancel the
resume function.
44
Press to start fast reverse
scanning. Press) (play) to
resume normal playback,
Press to start fast forward
scanning. Press F (play) to
resume normal playback.
I44
Skips to the start of the
current track or chapter, then
to previous tracks/chapters.
m Skips to the next track or
chapter.
Numbers Use to enter a title/track
number. Press ENTER to select
(or wart a few seconds).
l
If the disc is stopped, play-
back starts from the selected
title (for DVD) ortrack number
(for CD/Vrdeo CD/MPS).
l
If the disc is playing,
playback jumps to the start of
the selected chapter or track.
En