Removing The Airstation - Buffalo AirStation Pro WAPS-APG600H User Manual

1n/a & 11n/g/b smart model
Hide thumbs Also See for AirStation Pro WAPS-APG600H:
Table of Contents

Advertisement

Chapter 2 Placing Your AirStation

Removing the AirStation

To remove the AirStation from the fixture, perform the procedure below.
Ejector
Insert the supplied ejector into the position shown in the figure so that the clips of the AirStation are
raised, and then apply force in the direction of the arrow to remove.
If the AirStation is still difficult to remove using this procedure, turn the ejector by about 45 degrees
so that the clips on the AirStation are raised, and then apply force in the direction of the arrow to
remove.
- 24 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Airstation pro waps-ag300h

Table of Contents