Setting The Password In The Configuration Interface - Buffalo AirStation Pro WAPS-APG600H User Manual

Chapter 2 Placing Your AirStation

Setting the Password in the Configuration Interface

A user name and password must be entered to log into the configuration interface.
If you log into the configuration interface using the administrator name and password, you are
provided with privileges for reading and writing all setting parameters and statistical information.
The default administrator name is "admin", and the default administrator password is "password".
To prevent logging in by an unauthorized third party, once the initial setup of the AirStation is
completed, be sure to change the administrator password and user password settings.
1
Open the AirStation configuration interface.
2
Click "Advanced".
- 18 -