Buffalo AirStation Pro WAPS-APG600H User Manual page 20

Chapter 2 Placing Your AirStation
3
From the left-side menu, click "Admin Config" > "Name / Password".
4
Enter a new password for the administrator password and user password (Enter the same
password again in the Confirm fields.), then click [Apply].
Notes: · For the "administrator password", enter a character string of 6 to 32 characters consisting of single-byte
alphanumeric characters and symbols.
· For the "user password", enter a character string of 6 to 32 characters consisting of single-byte alphanumeric
characters and symbols.
· When setting the passwords, enter both the "administrator password" and "user password". If one of these
passwords is blank, the passwords cannot be set.
· If you log in using the "administrator name", all AirStation setting items can be changed.
· If you log in using a "user name", you can view all the AirStation setting values, but you cannot change them.
- 19 -