Selecting the installation location
Accessories
The following accessories are supplied with the indoor unit.
The type and quantity may differ depending on the specifications.
Pattern sheet (2)
Insulation cover pipe A (1) Insulation cover pipe B (1)
Flexible hose (1)
Cable-tie (8)
Indoor Unit
Select a convenient location that permits the air to reach every corner of the area to be cooled.
Pre-plan for easy and short routing of the refrigerant tubing and wiring to the outdoor unit.
There should be no flammable gas, alkaline, substances present in the air.
Avoid location where obstacles preventing good air circulation are present.
Noise prevention should be considered in determining the unit's location.
The structure, where the unit is to be installed should be strong enough to support the weight of the unit.
Rigid wall without vibration.
Where it is not exposed to direct sunshine.
Where the air filter can be removed and cleaned easily.
Space Requirements for Indoor Unit
Ceiling installation
11.81inch(300mm)
Ceiling
Wall
1.97inch(50mm)
4
Insulation drain (1)
User manual (1)
Install manual (1)
1.97inch
(50mm)
Ceiling
Wall
11.81inch(300mm) or more
Flexible hose clamp (1)
11.81inch(300mm) or more