Samsung AM036JNCDCH Installation Manual page 18

Setting an indoor unit address and installation option
12. Setting Cool mode
Press Mode button to be change to Cool mode in the OFF status.
13. Setting SEG16, SEG17 option
Press Low Fan button(∨) to enter SEG16 value.
Press High Fan button(∧) to enter SEG17 value.
Each time you press the button,
14. Setting Dry mode
Press Mode button to be change to Dry mode in the OFF status.
15. Setting SEG18, SEG20 option
Press Low Fan button(∨) to enter SEG18 value.
Press High Fan button(∧) to enter SEG20 value.
Each time you press the button,
16. Setting Fan mode
Press Mode button to be change to Fan mode in the OFF status.
17. Setting SEG21, SEG22 option
Press Low Fan button(∨) to enter SEG21 value.
Press High Fan button(∧) to enter SEG22 value.
Each time you press the button,
18. Setting Heat mode
Press Mode button to be change to HEAT mode in the OFF status.
19. Setting SEG23, SEG24 mode
Press Low Fan button(∨) to enter SEG23 value.
Press High Fan button(∧) to enter SEG24 value.
Each time you press the button,
Step 3. Check the option you have set
After setting option, press
Auto Cool
On
On
Auto Cool
Off
Off
Step 4. Input option
Press operation button with the direction of remote control for set.
For the correct option setting, you must input the option twice.
Step 5. Check operation
1. Reset the indoor unit by pressing the RESET button of indoor unit or outdoor unit.
2. Take the batteries out of the remote controller and insert them again and then press the operation button.
18
Option setting
...
will be selected in rotation.
...
will be selected in rotation.
... will be selected in rotation.
...
will be selected in rotation.
button to check whether the option code you input is correct or not.
Dry
Fan
On
On On
Dry
Fan
Off
Off Off
Status
Cool
Off
Cool
Off
SEG16
Off
Dry
Off
SEG18
Fan
Off
Fan
Off
SEG21
Heat
Off
Heat
Off
SEG23
Heat
Heat
Cool
Off
SEG17
Dry
Dry
Off
SEG20
Fan
Off
SEG22
Heat
Off
SEG24