Interface Module Installation (Optional) - Samsung AM036JNCDCH Installation Manual

Interface module Installation (Optional)

Accessories
Interface module : MIM-B14
External Control PCB Case
1. Fix the case at with bolts on the side of the control box in the indoor unit.(See the
picture)
2. Attach the Interface module PCB to the case in the control box of the indoor unit, then
connect the power and the communication cable between the Interface module and
the indoor unit;
3. If you install a Interface module to an indoor unit, every outdoor unit which is connected
to an indoor unit can be controlled simultaneously.
4. Each indoor unit connected to the same centralized controller has its own Interface
module.
Haness Wire(2P) Haness Wire (4P) Screw
15