Preparation Check
The Preparation Check window is displayed after the model has been refined and enables you to
verify important restoration data before continuing with the process.
Arch Display
The Arch Display section is displayed during preparation selection and after the model has been
refined and enables you to view or hide the upper and lower jaws.
Restoration Preparation Check: A list of items you
must check on the restorative 3D model to verify
the bite registration and preparation design.
You must examine the appropriate area of the 3D
model and select the corresponding option from
the list before you can move to the next step.
Verify the following:
•
Occlusal space
Undercut
•
•
Margin line
Orthodontic Preparation Check: A list of items
you must check on the orthodontic 3D model to
verify the accuracy of the model before sending it to
the imaging software.
You must examine the appropriate area of the 3D
model and select the corresponding option from
the list before you can move to the next step.
Verify the following:
No holes in the image
•
•
Jagged boundaries removed
•
Irregular soft tissue removed
Implant Preparation Check: A list of items you
must check on the implant 3D model to verify the
accuracy of the model before sending it to the
imaging software.
You must examine the appropriate area of the 3D
model and select the corresponding option from
the list before you can move to the next step.
Verify the following:
Entire scan body is visible
•
•
Bite
•
Gum tissue is captured correctly
•
Adjacent teeth are captured
Upper: Click the Upper Jaw button to view or hide the upper jaw.
Lower: Click the Lower Jaw button to view or hide the lower jaw.
CS 3500 User and Installation Guide (9H4853)_Ed07
13