5.5.1.1 Information; 5.5.1.2 License Information - Janz Tec emVIEW-7/RPI3 Hardware Manual

emVIEW-7/RPI3 (Hardware and Software Manual) • Operating System and Drivers
5 - 24
CODESYS Features
CAN/CANopen *1
Modbus RTU Master *2
GPIO device
Date / Time
*1: In the current version: 2.1.1.0 of the CODESYS control package, CAN/CANopen is included in the
evaluation and paid version, but not mentioned in the product description
*2: May require manual configuration in the CODESYS configuration files

5.5.1.1 Information

If you are interested in CODESYS runtime systems with real-time support, more Ethernet ports, or
more fieldbus ports, our embedded PC series emPC and panel PC series emVIEW offer the whole
range of industrial PCs in many performance classes.
https://www.janztec.com/en/embedded-computing.html

5.5.1.2 License Information

NOTICE
We strongly recommend, that you create a backup copy of an activated license!
In case that the contents of the card will become corrupt, the license will be lost! We strongly
recommend, that your first step is to create a backup copy of the activated license.
To create a backup copy of the license, copy the folder "backup" with the file „3SLicenseInfo.tar" from
the Raspberry Pi (accessible in CODESYS via double-click on the device under the tab "Files") to a
safe external storage.
© Janz Tec AG
Standard Raspbian
not supported
console (RS232, 2wire)
digital IO (4in, 4out)
red and green LEDs
requires a time server in the
network
Raspbian + emVIEW-7/RPI3
package
supported (using SocketCan)
console (RS232, 2wire)
serial port RS232 (4wire)
serial port RS485
digital IO (4in, 4out)
red and green LEDs
•
RTC / system time
•
(network time server also possible)
driver
Rev. 1.0