Maintenance; Figure 6: Emview-7/Rpi3 Micro Sdcard Location - Janz Tec emVIEW-7/RPI3 Hardware Manual

4 - 16
4

Maintenance

NOTICE
Always follow common ESD practice when you service the product!
Task
Replace µSD-card
Change jumper settings
Replace Battery
Refer to the images below for the screws to be removed for different maintenance tasks.
© Janz Tec AG
emVIEW-7/RPI3 (Hardware and Software Manual) • Maintenance
Remove these 3 screws
micro-
SDcard
figure 6: emVIEW-7/RPI3 microSD card
location and SD card bracket removal
Remove these
figure 7: emVIEW-7/RPI3 CPU top cover removal
Remarks
Remove SD card bracket
Remove CPU top
Complete disassembly
4 screws
Rev. 1.0