Cleaning The Filters - Shark Rotator NV681 Instructions Manual

STEP 3
3 Press top dust cup release
latch to access dust
screen and remove built-
up debris as required.
FOAM FILTER
FILTER FRAME

CLEANING THE FILTERS

1 Pre-Motor
(foam and felt):
With the dust cup
removed, take out and
rinse the foam and felt
filters with water. Tap
loose dirt off filters
between washes
as needed.
FELT FILTER
HEPA
2 Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill and
pull the Filter Access
latch to remove the grill.
Remove and rinse the
HEPA filter.
s h a r kc l e a n . c o m 20