Samsung AC***MNADKH Installation Manual page 21

Setting the indoor unit addresses
1 Make sure that the power is supplied to the indoor unit. If the indoor unit is not plugged in, it must include a power
supply.
2 The panel(display ) should be connected to an indoor unit to receive option.
3 Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
4 Assign an indoor unit address by wireless remote controller.
– The initial indoor unit ADDRESS is set as "MAIN : 0, RMC : 0".
– Set Main and RMC Address only the setting is required.
– There is no need to assign the indoor unit Main Address if the outdoor unit is addressing automatically.
The indoor unit Main address will follow the outdoor unit's automatically.
– Assign 12 digit when setting the indoor unit address.
– No need to assign SEG4, 5, 8, 10 which are non applicable. Even though those segments are set, they will be
ignored.
– If you set the applicable segments with numbers other than the indiciated, the initial setting will be maintained.
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Explanation PAGE
Indication Details
Indication
and Details
0
Option SEG7
Explanation PAGE
Indication Details
Indication
and Details
1
*SEG6: AJN** models should check maximum installation indoor unit number of outdoor unit.
(Indoor1: 0, Indoor2: 1, ~)
CAUTION
• When "A"~"F" is entered to SEG5~6, the indoor unit MAIN ADDRESS is not changed.
• If you set the SEG 3 as 0, the indoor unit will maintain the previous MAIN ADDRESS even if you input the option
value of SEG6.
• If you set the SEG 9 as 0, the indoor unit will maintain previous RMC ADDRESS even if you input the option value of
SEG11~12.
Example) If you want to set as "MAIN: 3, CHANNEL: 1, RMC: B",
SEG2 SEG3
MODE Setting Main address
Indication Details Indication
0
A
Main address
1
setting mode
SEG8 SEG9
Setting RMC address
Indication
RESERVED
0
RMC address
1
setting mode
SEG4
Details
RESERVED
No Main
address
SEG10
Details
RESERVED
No RMC
address
SEG5 SEG6
The unit digit of
an indoor unit
Indication Details
RESERVED
0~3(ACN*) Details
0~4
single
(AJN*)
SEG11 SEG12
Group
Group address
channel(*16)
Indication Details Indication Details
RMC1 0~2 RMC2
English
A
digit
0~F
21