Table of Contents
Advertisement
Setting an indoor unit address and installation option
Take the steps presented in the following table:
1
Setting SEG2, SEG3 option
Press Low Fan button
Press High Fan button
Each time you press the button,
rotation.
2
Setting Cool mode
Press Mode button to be changed to Cool mode in the ON status.
Setting SEG4, SEG5 option
3
Press Low Fan button
Press High Fan button
Each time you press the button,
rotation.
4
Setting Dry mode
Press Mode button to be changed to DRY mode in the ON status.
Setting SEG6, SEG8 option
5
Press Low Fan button
Press High Fan button
Each time you press the button,
rotation.
6
Setting Fan mode
Press Mode button to be changed to FAN mode in the ON status.
7
Setting SEG9, SEG10 option
Press Low Fan button
Press High Fan button
Each time you press the button,
rotation.
8
Setting Heat mode
Press Mode button to be changed to HEAT mode in the ON status.
18 English
Option setting
to enter SEG2 value.
to enter SEG3 value.
will be selected in
to enter SEG4 value.
to enter SEG5 value.
will be selected in
to enter SEG6 value.
to enter SEG8 value.
will be selected in
to enter SEG9 value.
to enter SEG10 value.
will be selected in
Status
SEG2
SEG3
SEG4
SEG5
SEG6
SEG8
SEG9
SEG10
Advertisement
Table of Contents
