Table of Contents
Advertisement
Additional Information
Specifications
TV system
B/G
Colour system
PAL, NTSC 3.58, 4.43 (only Video In).
Channel coverage
VHF: 0 to 12, 5A, 9A
UHF: 28 to 69
CATV: S01 to S03, S1 to S41
Sound output
Left and Right speakers: 2x30W (Music Power)
2x15W (RMS)
Centre speaker:
1x20W (Music Power)
1x10W (RMS)
Surround speakers:
2x10W (Music Power)
2x5W (RMS)
Power consumption
170W
Picture tube
FD Trinitron WIDE Approx 91cm, 102° deflection.
Dimensions (w x h x d)
Approx. 972 x 614 x 591 mm
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Problem
No picture (screen is dark), no sound.
Poor or no picture (screen is dark), but good
sound.
Good picture, no sound.
No colour on colour programmes.
Distorted
picture
when
programmes or selecting Teletext.
Remote control does not function.
The standby indicator
on the TV flashes.
•
If you continue to have problems, have your TV serviced by qualified personnel.
•
NEVER open the casing yourself.
24
Weight
Approx. 90 kg
Rear Terminals
1
2
(
HD
External speaker terminals: 2-pin DIN (5)
Front Terminals
L
R
s
i
Other features
Flat display Trinitron tube, Noise Detection, DRC Progressive picture, DRC
1250, DRC 100, Multi PIP, PAP, PAT, Graphic Equaliser, Personal ID, Colour
Tone, Sleep Timer, Dolby Surround, Digital Comb Filter, second tuner.
Design and specifications are subject to change without notice.
Suggested remedy
•
Plug the TV in.
•
Press the
•
If the
indicator is on press the
remote control.
•
Check the aerial connection.
•
Turn the TV off for 3 or 4 seconds and then turn it on again using the
button on the front of the TV.
•
Using the MENU system, select the Picture Adjustment display. Adjust the
brightness, picture and colour balance levels.
•
From the Picture Adjustment display select RESET to return to the factory
settings.
•
Press the
•
If
is displayed on the screen, press the
•
Using the MENU system, select the Picture Adjustment display and adjust
the colour setting.
•
From the Picture Adjustment display select RESET to return to the factory
settings.
changing
•
Turn off any equipment connected to the scart connectors on the rear of the
TV.
•
Replace the batteries.
•
Contact your nearest Sony service centre.
/
Audio/Video input, Component input, TV Audio/Video output.
1
/
Audio/Video input, S-video input, Selectable audio/video output.
s
2
Phono jacks:Y, P
,P
B
Phono jacks: Audio input.
L/G/S/I
Phono jacks: variable output for audio signals.
R/D/D/D
RF In
Phono jacks: Video input.
Phono jacks: Audio inputs.
4 pin DIN: S video input.
Stereo Minijack: Headphones input.
button on the front of the TV.
/
button or a numbered button on the
+ button on the remote control.
inputs,
R
button on the remote control.
Hide quick links:
Advertisement
Table of Contents
