Table of Contents
Advertisement
Additional Equipment
Additional information when connecting equipment
•
If the picture or sound is distorted, move the VCR away from the TV set.
•
When connecting a monaural VCR, connect only the white jack to both the TV set and the VCR.
•
For information on how to select the output signal of the scart 2
section of this instruction manual.
•
When connecting external hi-fi equipment, you can adjust the volume level by adjusting the headphones setting in the 'Audio
Adjustment' menu - please refer to the 'Adjusting picture and sound' pages, in the 'Using the TV menu system' section of
this manual.
Remote control of other Sony equipment
Using the buttons underneath the cover of the remote control you can control other Sony equipment.
1. Open the top cover of the remote control.
2. Set the selector VTR 1234 DVD (see diagram below) according to the equipment you want to control:
VTR1:
Beta VCR
VTR2:
8mm VCR
VTR3:
VHS VCR
VTR4:
Digital Video (DCR-VX 1000/9000E,VHR-1000)
DVD:
Digital Video Disk
3. Use the buttons on the remote control to operate the equipment.
•
If your equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector
on the TV remote control.
•
If the equipment does not have a certain function, the corresponding button on the remote control does not work.
VTR 1234 DVD selector
Play button
Rewind button
Stop button
Pause button
2
/
s
2
, please refer to the 'Using the Features menu'
Remote control top cover
Fast Forward buttons
Channel Select buttons
Record button
23
Hide quick links:
Advertisement
Table of Contents
