Dodge DART 2016 Owner's Manual page 367

3. Turn the ignition switch to the OFF/LOCK position.
Using The DID Menu
Vehicles Equipped With Passive Entry
• Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (Do not start the engine.)
• Push and release the UP
button to scroll through the main menu to "Vehicle
Info."
• Push and release the RIGHT
access the "Oil Life" screen.
• Push and hold the RIGHT
second to reset the gauge and numeric display to
100% for "Oil Life."
• Push and release the UP
button to exit the DID screen.
Vehicles Not Equipped With Passive Entry
• Turn the ignition switch to the ON/RUN position (do
• Push and release the UP
• Push and release the RIGHT
or DOWN arrow
• Push and hold the RIGHT
arrow button to
• Push and release the UP
arrow button for one
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
or DOWN arrow
reset. If necessary, repeat this procedure.
UNDERSTANDING YOUR INSTRUMENT PANEL 365
not start the engine).
button to scroll through the main menu to "Vehicle
Info."
access the "Oil Life" screen.
second to reset the gauge and numeric display to
100% for "Oil Life."
button to exit the DID screen.
or DOWN arrow
4
arrow button to
arrow button for one
or DOWN arrow