Manual Recording (Analog Or Digital) - Pioneer PDR-W37 Elite Operating Instructions Manual

Manual recording (analog or digital)

The main use for manual recording mode is when there are no
specific start and/or end points in the source material — when
you're recording from a tuner or a satellite decoder, for example.
1 Make sure that any discs loaded in
the CD changer are stopped.
2 Load a CD–R or CD–RW disc.
If it's a blank disc, the display shows
If the disc isn't blank, use the
there's enough space on it for what you want to record.
3 Press INPUT to choose the input to
use.
Pressing repeatedly switches the active input:
INPUT
–
ANALOG OPTICAL
The recorder's display indicates the current input.
4 Press REC.
The recorder indicates that it's in record-pause mode.
◊ÛB¿ˆ≤≥
COMPACT DISC RECORDER / MULTI-CD CHANGER
3
- COMPACT DISC MULTI CHANGER
INPUT
7
.
NEW DISC
button to check that
DISPLAY
– –
1 2
OPTICAL COAXIAL
8 Recording Other Sources
COMPACT DISC DIGITAL RECORDER
6
CD TEXT
5 For digital sources, check that the
signal is compatible.
Set the source playing (if it isn't already) and check the
display. If you see the message Can't REC the digital
signal is either a format that the recorder doesn't recognize,
or the source is copy protected. Record through the analog
line inputs if you see either message.
6 Adjust the recording level, if
necessary:
• To adjust the recording level, see step 4 of Digital synchro
recording on page 39.
• To adjust the analog recording level, see step 4 of Analog
synchro recording on page 40.
Press 6 (CD-R side) to start re-
7
cording.
8 Start the source playing.
During recording, press ¡ ¢ (CD-R side) anywhere
you want a new track to start (auto track numbering must
be off—see page 26 to do this).
When you're finished, press 7 to stop
9
recording.
If you want to finalize the disc after recording, see page 30.
OPEN/CLOSE
0
REC/
REC MUTE
¶
¶
REC VOL
¡ ¢
DISPLAY
CHARACTER
7
PUSH ENTER
Hi-bit Legato Link Conversion
41