Remote Control - Pioneer PDR-W37 Elite Operating Instructions Manual

Remote control

1 DISPLAY/CHARA – Press to switch between display
modes (p.16), and between upper- and lower-case
characters while using CD text (p.23).
2 SCROLL – Press to scroll through long names in CD
text. (p.16, 23)
3 MENU/DELETE – Press to access the preference
menu options (p.15). Press to delete characters while
editing CD text (p.23–24).
4 FADER – Press to fade in or fade out during playback or
recording. (p.26,37)
5 PLAY MODE – Set the play mode to play one disc, all
discs in the 3-CD changer, or all discs in both the changer
and CD-R. (p.15)
6 10/0 MARK–Use in selecting tracks over ten, as well
as for choosing symbols when using CD text (p.23).
7 Playback control buttons
4 ¢ – Skip back/forward tracks. (p.14)
3 – Start or resume playback, or start recording from
record-pause mode.
1 ¡ – Press and hold for fast-reverse and fast-
forward playback, and to move cursor position when using
CD text. (p.23)
ENTER –Confirm menu settings (p.15); confirm
characters in CD text (p.24).
7 – Stop playback or recording.
8 REC THIS – Press to record the track that's currently
playing in the changer. (p.13)
9 Disc select buttons
DISC 1/2/3 – Press to select and play disc 1, 2 or 3
from the changer. (p.14)
CD-R – Switch to the CD recorder and play the currently
loaded CD/CD-R/CD-RW (p.14).
10 Playback / skip buttons
PROGRAM – Program the playback track order.
(p.35,36)
CHECK – Check the tracks of a programmed playlist
(p.35), and monitor the CD changer (p.28).
CLEAR – Clear the last programmed track in program
play mode. (p.35)
RANDOM – Start random track/disc playback. (p.37)
REPEAT – Set the repeat mode. (p.36)
SKIP PLAY – Press to switch skip play on or off (p.31).
SKIP ID SET/CLEAR – Set or clear a track skip ID
for the current track. (p.33)
3 Controls and Displays
DISPLAY
1
TIME /CHARA
SCROLL
2
1
MENU/
GHI
DELETE
3
4
FADER
PQRS
4
7
PLAY
MARK
MODE
5
10/0
6
4
CURSOR
7
1
ENTER
REC
THIS
8
1 2
DISC DISC
9
PROGRAM CHECK
10
SKIP ID
SKIP PLAY
SET
COMPACT DISC RECORDER/
MULTI-CD CHANGER
REMOTE CONTROL UNIT
11 NAME CLIP – Press to copy the current CD text to the
recorder's memory.
12 Number / Letter buttons – Use to jump directly to
track numbers for playback, selecting track numbers for
editing / programming, and selecting letters when using
CD text.
13 NAME – Use to cycle through the CD text naming
options. (p.23)
14 >10– Use to select track numbers over 10.
8 – Pause playback or recording.
15
1 1
NAME CLIP
ABC DEF
2 3
12
JKL MNO
5 6
TUV WXYZ
9
8
13
NAME
>10
14
¢
3
¡
7
8 15
3 CD-R
DISC
CLEAR RANDOM
REPEAT
CLEAR
Î
11