Playback Functions; Programming A Playlist (3-Cd Changer); Clearing The Playlist - Pioneer PDR-W37 Elite Operating Instructions Manual

TIME
A B C D EF
1 2 3
G H I J KL M N O
4
5 6
PQ R S T UV W XY Z
9
7 8
PLAY
MARK
MODE
10/0 >10
4 ¢
3
7
DISC 1 DISC 2 DISC 3
PROGRAM CHECK CLEAR
Programming a playlist
Programming a playlist means telling the player precisely which
tracks, and in what order, you want played. You can program a
sequence of up to 30 tracks, playing tracks from any of the discs
loaded in the changer, and playing tracks more than once if you
like.
1 With all discs stopped(with CD 1, 2,
or 3 in the display), press PROGRAM.
The indicator lights and the display prompts you to
PGM
enter the first disc/track in the playlist:
CD – TRK ––
2 Enter the disc/track numbers in the
order you want them played.
Use the buttons to select the disc.
DISC
Use the number buttons to select tracks:
• For track numbers 1 to 10, use the corresponding number
button.
• For track numbers over 10, press the >10 button, then enter
the track number. For example, to select track 20 press
>10, 2, then 10/0.
• You can also use the 4 and ¢ buttons to select tracks,
pressing after each to enter it into the playlist.
PROGRAM
After adding a track to the playlist, the display shows the disc
and track number and the total playing time of the playlist:
TRK
CD2 O1
Note: The display will not show the total playing time of
playlists that exceed 100 minutes.
COMPACT DISC RECORDER / MULTI-CD CHANGER
3
- COMPACT DISC MULTI CHANGER
6 7
(3-CD changer)
PGM
MIN SEC
O8:39
◊ÛB¿ˆ≤≥
PLAY MODE
Press 3 (6 on the front panel) to
3
start playback.

Clearing the playlist

Clear the playlist by either:
• pressing 7 while the disc is stopped.
• pressing
PLAY MODE
• ejecting a disc in the changer (or the CD-R disc tray to clear
a CD-R playlist).
Clearing a track from the playlist
With playback stopped, delete the last (most recently) programmed
track by pressing
CLEAR
Checking what's in the playlist
When the disc is stopped you can check the contents of the playlist
using the button. Each press steps through the playlist,
CHECK
showing the step number and the corresponding disc and track
number.
Adding a track to the playlist
During playback, you can add the track currently playing to the
playlist by pressing
PROGRAM
playlist, then one is created.

7 Playback Functions

COMPACT DISC DIGITAL RECORDER
6 7
Hi-bit Legato Link Conversion
CD TEXT
.
. Press repeatedly to clear several steps.
twice. If there is currently no
35