What's What; Front Panel - Pioneer PDR-509 Operating Instructions Manual

What's What

Front Panel

1
1 POWER switch (p.15)
Switches power to the unit on and off.
2 INPUT SELECTOR (pp.20-25)
Switches between the analog, optical digital and coaxial
digital inputs.
3 MONITOR (p.24,25,32)
Press to monitor the selected input and display digital
source information.
4 TIME (p.17)
Switches the display mode (elapsed track time,
remaining track time, total disc playing time, etc.)
5 DISP OFF (p.17)
Press to switch the character display off. The indicator
above the button lights to remind you that the display is
switched off.
6 Function indicator
Indicates the current function of the unit:
Lit – recording a
Blinking – record-mute and
7 OPEN/CLOSE 0 (p.15)
Press to open or close the disc tray.
8 RECORD ¶ (pp.23-25)
Press to enter record-pause mode for setting input
levels, etc.
9 REC MUTE • (p.31)
Records a blank section on a disc (for space between
tracks, etc.)
p DIGITAL REC LEVEL / 4 ¢
Turn the jog dail to set the digital recording level (p.24)
and skip tracks (p.16).
Push the jog dial to: start playback (stop mode only)
(p.15); input track number (during programming) (p.26);
display the digital recording level (monitor, record,
record-pause modes) (p.24).
q ANALOG REC LEVEL (p.25)
Sets the recording level for analog-input recording.
Outside ring controls left input level; inside dial controls
right input level.
12
2 3 4 5
◊ÛB - .?/
INPUT
MONITOR TIME
SELECTOR
w e r t y
- / - , or erasing a –
CD R CD RW CD RW
-record modes.
PMA
6
COMPACT DISC DIGITAL RECORDER
u
The illustration shows the U.S. and Canadian models.
w TRACK NUMBER AUTO/MANUAL (p.30)
Switches between automatic and manual track number-
ing when recording a disc. Indicator lights to remind
you when manual track numbering has been turned on.
e TRACK NUMBER WRITE [MANUAL] (p.30)
Press during recording to start a new track number
(when in manual track numbering mode).
r FINALIZE (p.33)
Press to start the disc finalization process (to make
recordable
CD
t ERASE (CD-RW discs only) (pp.34–35)
Press to start erasing tracks, or to re-initialize a disc.
y Remote sensor (p.14)
u Character display (p.14)
i 1 and ¡ (p.15)
Press and hold for fast-reverse and fast-forward
playback.
o 3 (p.15)
disc.
Press to play, or resume playing, a disc. Also use to
start recording from record-pause mode.
; REPEAT (p.16)
Use to set the repeat mode (current track, disc, or
repeat off).
a 8 (p.15)
Press to pause playback or recording.
s 7 (p.15)
Press to stop playback or recording.
d DIGITAL SYNCHRO (pp.20–22)
Press to start recording on detection of a digital input
signal.
f PHONES jack
Plug in a pair of stereo headphones for private listening
or monitoring.
g LEVEL
Use to adjust the phones volume level.
9 p
7 8
DIGITAL
REC LEVEL
REPEAT
i o ; a s d f
s playable on ordinary players).
CD
q
ANALOG
REC LEVEL
g