Download  Print this page

Cisco SPA112 Quick Start Manual page 5

Intermedia cloud pbx
Hide thumbs


1. Connect your fax machine to the ATA by plugging one end of the
included phone cord into the Phone 1 port on the ATA, and the other
end into the Line port on your fax machine.
2. Connect the included Ethernet cable to the Internet port on the ATA
and connect it to a switch or router in your network.
3. Connect the included power cable to the power port on the ATA and
plug in the power cable.
Once properly connected to your network, the ATA will need several
minutes to download configuration settings and restart. Once finished,
the ATA will provide dial tone for your fax machine.


Table of Contents

  Related Manuals for Cisco SPA112