Safety Considerations - Native Instruments Audio 2 DJ Operation Manual

2 Safety Considerations

The following sections contain important information regarding the use of the
Please read them thoroughly before using the AUDIO 2 DJ!
2.1 Warning
►
The AUDIO 2 DJ , in combination with an amplifier, headphones or speakers, can pro-
duce sounds in decibel ranges that may cause hearing damage. For protection, set all
volume levels to a minimum before using AUDIO 2 DJ . Gradually raise the volume
controls while music is playing to set the desired listening level. If you experience any
hearing problems or ringing in the ears, consult a hearing specialist immediately.
2.2 Caution
►
Before connecting the AUDIO 2 DJ hardware to other electronic components, turn off
the power for all devices. Before powering your system up or down, set all volume
levels to minimum.
►
The AUDIO 2 DJ hardware contains no user-serviceable parts. Do not open it or attempt
to disassemble or modify any internal hardware. If there appears to be a hardware
malfunction, immediately stop using the hardware and contact Native Instruments.
►
Do not expose the AUDIO 2 DJ to rain, and do not use it near water or in damp or wet
conditions. Also, never place anything on top of the controller, and be careful that no
objects or liquids of any kind enter the unit.
►
The AUDIO 2 DJ hardware is powered via USB. Operation can be guaranteed only as
a single device with a USB 2.0 controller or with a self-powered USB 2.0 hub.
►
Do not place the AUDIO 2 DJ hardware in an unstable position where it might acci-
dentally fall to the ground.
►
Before moving the AUDIO 2 DJ hardware, remove all connected cables.
.
AUDIO 2 DJ
AUDIO 2 DJ – 5