Native Instruments Audio 2 DJ Operation Manual page 11

9. Once the installation has been performed successfully, click "Finish."
10. After the installer has finished running, connect the AUDIO 2 DJ to a USB 2.0 port
on your computer, using the USB cable included in the package. Windows will identify
the AUDIO 2 DJ and begin the final installation process.
11. Choose "No" if Windows asks you to search the Internet for a driver.
12. Choose "Automatic" when Windows asks you how to install the software.
13. Click "Finish" to complete the installation.
14. After you have completed the installation procedure, the installer will start again. You
need to pass through the same sequence of installer steps once again in order to in-
stall all required driver components. This is an intended behavior, so just follow along
in order to finish the installation.
! !
You cannot install the AUDIO You cannot install the AUDIO
2 DJ on a USB 1.1 port – a 2 DJ on a USB 1.1 port – a
USB 2.0 port is required. USB 2.0 port is required.
AUDIO 2 DJ – 11