Adjusting Bass; Adjusting Treble; Adjusting Loudness; Using Subwoofer Output - Pioneer DEH-P6450 Operation Manual

Section
Audio Adjustments
06

Adjusting bass

You can adjust the cut-off frequency and the
bass level.
• In mode, bass adjustment affects only
FRT1
the rear output: front output cannot be
adjusted.
1 Press
AUDIO
Press until
AUDIO
2 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— — —
40 63 100 160
3 Press 5 or ∞ to adjust the bass level.
Each press of 5 or ∞ increases or decreases
the bass level.
+6
increased or decreased.

Adjusting treble

You can adjust the cut-off frequency and the
Treble level.
• In and
FRT1 FRT2
affects only the front output: rear output cannot
be adjusted.
1 Press
AUDIO
Press until
AUDIO
2 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— — —
2.5k 4k 6.3k
3 Press 5 or ∞ to adjust the treble level.
Each press of 5 or ∞ increases or decreases
the treble level.
+6
increased or decreased.
28
En
to select .
Bass
appears in the display.
Bass
(Hz)
– is displayed as the level is
–6
modes, treble adjustment
to select .
Treble
appears in the display.
Treble
(Hz)
10k
– is displayed as the level is
–6

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press to select
AUDIO
Press until
AUDIO Loud
2 Press 5 to turn loudness on.
Loudness level (e.g.,
Loud Mid
display.
3 Press 2 or 3 to select the level.
Press 2 or 3 until the desired level appears in
the display.
(low)— (mid)—
Low Mid
4 Press ∞ to turn loudness off.
appears in the display.
Loud OFF

Using subwoofer output

This unit is equipped with a subwoofer output
which can be switched on or off. When a sub-
woofer is connected to the rear output, first,
switch the rear output setting to subwoofer,
then turn the subwoofer output on. For more
details, see Switching the rear output setting on
page 32.
1 Press to select
AUDIO
When the rear output setting is subwoofer, you
can select . Press
Sub-W1
appears in the display.
2 Press 5 to turn subwoofer output on.
appears in the display. Subwoofer
Sub-W1 ON
output is now on.
• You can turn off subwoofer output by pressing
∞.
.
Loud
appears in the display.
) appears in the
(high)
High
.
Sub-W1
until
AUDIO Sub-W1
06