Troubleshooting - Philips SalonPro HP4892 User Manual

Troubleshooting

If problems should arise with your hairdryer and you are unable to
solve them by means of the troubleshooting guide below, please
contact the nearest Philips service centre or the Philips Customer Care
Centre in your country.
Problem
The appliance does not
work at all.
Cause
Perhaps the socket to
which the appliance has
been connected is not
live.
The appliance may have
overheated and switched
itself off.
The appliance may not
be suitable for the
voltage to which it has
been connected.
The mains cord of the
appliance may be
damaged.
ENGLISH
Solution
Make sure the socket is
live.
Unplug the appliance and
let it cool down for a
few minutes. Before you
switch the appliance on
again, check the grilles to
make sure they are not
blocked by fluff, hair, etc.
Make sure that the
voltage indicated on the
type plate of the
appliance corresponds to
the local mains voltage.
If the mains cord is
damaged, it must be
replaced by Philips, a
service centre authorised
by Philips or similarly
qualified persons in
order to avoid a hazard.
11