Package Contents - Insignia NS-HSB318 User Manual

Package contents

Soundbar
Remote Control with
CR2025 battery
RCA Audio Cable
Soundbar Home Theater Speaker with Bluetooth
AC Adapter
3.5 mm to RCA cable
www.insigniaproducts.com
LEVELING EDGE
Hold a level to the Leveling Edge of this template
Drill a hole here
20.43 inches (519 mm)
Select a location close to your TV and directly in Position the wall mount template on the wall where you Drill two holes in the wall where the template indicates, Wall Soundbar
front of the viewing/listening position. For best want to mount your soundbar, level the template, then then remove the template. Approx. 1/4 in
sound quality, choose a location where sound waves tape it to the wall. Wall (6.8 mm)
are not blocked by furniture or other obstacles. Wall Wall
Secure two screws (not included) to the wall or wall anchors
Anchor (if required). The screws must protrude from the wall by
If you are mounting on drywall or concrete, insert wall about 1/4". Use a #10 wood screw (or similar), 1 1/2" in
length. The screw width must be about 3/16" and the screw
anchors (not included) into the holes and use a hammer Align the speaker hanging brackets with the screws,
to make sure that the anchors are flush against the wall. head must be approximately 1/4" to 3/8". then hang the soundbar on the screws.
Note: Make sure that the template is level.
Wall Mounting Template
Quick Setup Guide
LEVELING EDGE
Drill a hole here
Tools Needed
Wall mount template
Wall
Wall
Position holes onto studs behind drywall or use anchors for mounting anchors (2)
Warning: Improper installation can result in serious injury or damage to your soundbar. Screws (2) - #10 x 1 ½"
If necessary, seek the assistance of a professional. wood screw (or similar)
V1 14-0130
5