Insignia NS-HSB318 Quick Setup Manual

PACKAGE CONTENTS
QUICK SETUP GUIDE
Soundbar Home
Wall mount template
Theater Speaker
System with Bluetooth
NS-HSB318
AC adapter
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, enter your model in the search box,
then press ENTER. Next to Features, click Support & Downloads,
then next to User Guide, click the language you want.
FEATURES
# DESCRIPTION
Top view
1
(Power) indicator
2
Input source indicator
3 BASS indicator
4 DSP indicator
Side view
5 POWER
button
6 BASS button
7
Input source selector
8 DSP (Digital Signal
Back view Processor) button
9 VOL +/– buttons
10
Hanging holes
11 SOURCE 1 - OPTICAL
jack
12 SOURCE 2 - LINE IN jack
13 SOURCE 3 - USB
14 DC IN jack
15
Remote control
(Power) button
16 SOURCE button
17 /USB button
18 DSP buttons
19
(Mute) button
20 BASS button
21 VOL +/– buttons
Before using your new product, please read these instructions to prevent any damage.
CONNECTING THE SOUNDBAR
Look at the back of your source device, such as a TV, DVD/Blu-ray player, or cable box, to identify your
Soundbar
audio OUT ports. Choose one connection option below that fits your audio source. You can connect
several devices and switch the sound source as needed.
Remote control
Caution: Turn off or unplug all devices while you are making connections.
Note: If you mounted your soundbar on a wall, you must use the included right-angle cable connectors for the AUX IN or
RCA cable connections.
AUDIO QUALITY
3.5 mm to RCA cable
RCA audio cable
- PICK ONE -
Quick Setup Guide
Digital connections (BEST)
1 Connect one end of the digital optical cable (not included)
FUNCTION
to your soundbar.
Lights when the soundbar is in standby mode, turns off when the
2 Connect the other end into the Digital Optical Output
soundbar is power on.
port on your audio source device.
Lights to indicate which sound source is selected.
3 Change the device's audio output to 'PCM' format
1 Optical
(typically found in Audio Settings). Refer to the
2 LINE IN
3 USB documentation that came with your audio source device
4 Bluetooth
for more information.
Indicates when the bass is on.
Lights to indicate that the DSP sound mode is on.
Standard - Green indicator light
- OR -
Theater - Blue indicator light
News - Pink indicator light
Press to turn on the soundbar.
RCA connection (GOOD)
Press to turn on the bass frequency enhancement.
1 Connect the right-angled connectors of the
Press repeatedly to cycle through the available sound sources.
included RCA audio cable to your soundbar.
Press repeatedly to cycle throughout the available DSP sound modes.
2 Connect the other end of the RCA audio cable
into the Audio Output ports on your audio
Press to increase or decrease the volume of the soundbar.
source device.
Use holes a and b to hang the soundbar on a wall.
Note: Make sure that the cable ends match the color of
If your TV (or other audio source device) has an Optical OUT jack, connect
the ports.
a digital optical cable (not included) to your source device and this jack.
If your TV (or other audio source device) has RCA OUT jacks, connect the
RCA cables to your source device and these jacks.
If your TV (or other audio source device) has an AUX OUT or headphone
jack, connect the 3.5 mm to RCA cable to your source device and this jack.
- OR -
You can play wave signal via USB, and it is with 5V 0.5A output current for
charging.
Connect the AC adapter to this jack to power the soundbar.
Press to turn on the soundbar. Press again to put the soundbar into
3.5 mm connection (GOOD)
standby mode.
1 Connect the red and white connectors of the
Press repeatedly to cycle through the available sound sources.
included 3.5 mm to RCA cable to your soundbar.
When a USB or Bluetooth source is selected, you can control playback
2 Connect the other end of the 3.5 mm to RCA
with the following buttons:
cable into the Audio Output port or headphone
• Previous ( ) • Play/Pause ( ) • Next ( )
jack on your audio source device.
Press to select the Digital Signal Processor (DSP) sound mode:
• Standard • Theater • News
The corresponding indicator on the soundbar top panel lights to indicate
the sound mode selected.
Press to mute the sound from the soundbar. Press again to restore the
sound.
Press to activate the bass frequency enhancement.
Press to increase or decrease the volume of the soundbar.
JACK TYPE (on source device) CABLE
BEST
Digital optical cable (not included)
GOOD
RCA audio cable (included)
GOOD
3.5 mm to RCA cable (included)
TV or DVD/Blu-ray
player
Back of the soundbar
TV or DVD/Blu-ray
player
RCA audio cable
(included)
Back of the soundbar
3.5 mm to RCA cable (included)
Audio source
(smartphone
or MP3 player)
Back of the soundbar
CONNECTING THE AC ADAPTER
Cautions:
• Make sure that the electrical outlet matches the AC adapter's
input requirements of 100-240 V, 50/60 Hz before connecting.
• Use only the AC adapter provided.
• Plug in the AC adapter only after all other connections
have been made.
1 Connect the AC adapter to the DC IN jack
on the back of the soundbar.
2 Plug the other end of the AC adapter into
a power outlet or surge protector.
CONNECTING YOUR SOUNDBAR USING BLUETOOTH (OPTIONAL)
Pairing your devices
Digital optical cable 1 Turn on your soundbar.
(not included)
2 Place your Bluetooth device within 30 ft. (10 m) of your soundbar.
3 Select Bluetooth as the input source by pressing the
soundbar. The blue Bluetooth indicator on the soundbar blinks slowly.
4 Navigate to your device's Bluetooth settings, turn on Bluetooth, then search for available devices. For
additional information on pairing your device, refer to your device's documentation.
5 On your Bluetooth device, select "NS-HSB318" from the device list. Repeat steps 3-4 if "NS-HSB318" is
not displayed.
6 If a PIN code is requested, enter "0000."
7 When pairing is completed the Bluetooth indicator on the top of your soundbar lights solid blue.
Notes:
• Some devices, such as an iPhone, connect immediately after pairing, other devices, such as notebook computers, may ask
you if you wish to connect. In this instance, the Bluetooth indicator continues to blink until a connection is established.
• When you turn on your soundbar, it automatically connects to the last connected device if that device is in range. To
connect to a different paired device, turn off Bluetooth or unpair from the currently paired device and manually connect
to the other paired device.
• When a call is received while playing music through a phone, the music stops automatically.
• When the call ends, depending on the setting of your phone, the current track may resume playback.
Disconnecting your devices
• Turn off the Bluetooth function on your device.
Note: For more information about using Bluetooth, see the online User Guide.
Back of the soundbar
(source) button on the remote control or the
OVER