1. Manuals
  2. Brands
  3. IDEAL Manuals
  4. Test Equipment
  5. Super Series 4
  6. Operating instructions manual

IDEAL 4 Operating Instructions Manual

Hide thumbs Also See for 4:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Testsets Operating Instructions
Models: 4, 4SP
This symbol indicates that the user should read these
!
operating and connection instructions before use.
CAUTION
FOR YOUR SAFETY AND TO PREVENT DAMAGE TO THE UNIT, DO NOT
CONNECT THIS TESTSET TO 110 VOLT OR 220 VOLT AC POWER LINES.
INTENTIONAL OR ACCIDENTAL CONNECTION TO AC POWER LINES IS
ENTIRELY THE USER'S RESPONSIBILITY AND VOIDS THE WARRANTY.
FOLLOW GOOD SAFETY PRACTICES DURING INSTALLATION AND
TESTING OF TELEPHONE SERVICES.
CONNECTION
The testsets may be connected only to telephone circuits only by using
a recommended cordset during the installation and testing of telephone
services. All connections to the testset must be made using a recommended
cordset inserted into the modular jack located inside of the unit. Please see
CORDSETS section for details of recommended cordsets to be used with
the testsets.
DESCRIPTION
The telephone testsets are used by installers, repair technicians, and other
telecommunications personnel for the installation and testing of telephone
services.
The IDEAL Testsets provide:
• DTMF (tone) and rotary (pulse) dialing
• Electronic ringer to indicate incoming calls
• Last number redial - 23 digits - T/P
• Line polarity indication
• Line monitor feature
• Register recall/hook flash
• Mute feature for noisy locations
• Amplified Speaker operation (4SP)
• Modular cordset connection
The amplified speaker feature allows the user to monitor line activity while
making notes, etc.
The modular jack for cordset connection allows you to change cordsets
quickly.
#62-400, #62-405
1

Advertisement

Table of Contents
loading

Related Manuals for IDEAL 4

Summary of Contents for IDEAL 4

  • Page 1 #62-400, #62-405 Testsets Operating Instructions Models: 4, 4SP This symbol indicates that the user should read these operating and connection instructions before use. CAUTION FOR YOUR SAFETY AND TO PREVENT DAMAGE TO THE UNIT, DO NOT CONNECT THIS TESTSET TO 110 VOLT OR 220 VOLT AC POWER LINES.

  • Page 2: Switches And Indicators

    The polarity indicator LEDs are located above the keypad. Please see OPERATION section for details. Keypad There are 12 standard network addressing keys, and 4 control keys to enable special functions. The 12 standard keys are used in signaling and for entering digits for network addressing.
  • Page 3 F - FLASH key - When pressed, the testset produces line break (hook flash). This function is typically used for register recall. Pol - POLARITY key - When the polarity key on the Model-4 is pressed, the polarity of the line is checked and indicated on the LED’s. Please see OPERATION section for details.

  • Page 4: Operation

    Redialing of the last number dialed may be done in TONE or PULSE modes. Up to 23 digits may be recalled. The memory of the Model 4 will retain the last number dialed for about 15 minutes. To use redial: After you have dialed a number, go off-line for a moment, then press “TLK”...
  • Page 5 BELT CLIP Polarity Check - Model 4 For Model 4 please use the following procedure to check line polarity. Connect the BLACK test lead to TIP (positive), and connect the RED test lead to RING (negative). Switch to “TLK” to access the network. Press the “Pol”...

  • Page 6: Specifications Electrical

    This cordset is to be used for testing standard modular jack connections and has a 6-position, 4-wire modular plug at each end. One modular plug is inserted into the modular jack inside of the Model-4 testset, and the other modular plug is inserted into the jack to be tested.

  • Page 7: Memory Dialing

    18 months from the date of manufacture. No warranties other than that set forth in this section are given or implied. IDEAL shall not be liable for any consequential damages or loss, direct or incidental, including without limitation, damages or expenses resulting from the use, the misuse, or the inability to use its products.
  • Page 8 For in-warranty service, ship the unit to our service group. Include a form of proof-of-purchase, such as a photocopy of the sales receipt. IDEAL will, at our option, repair or replace your testset free of charge, and will return it freight prepaid.

This manual is also suitable for:

4sp

Table of Contents