Table of Contents
Advertisement
84
Parameter
Onboard LAN 1
Onboard LAN 2
Onboard VGA
PCI IRQ Sharing
Description
When you set the PCI IRQ Setting
parameter to Auto, this parameter
specifies the auto-assigned interrupt for
the onboard LAN controlers installed in
your system.
When you set the PCI IRQ Setting
parameter to Manual, you need to specify
the interrupt that you want to assign for
the onboard LAN controllers installed in
your system.
When you set the PCI IRQ Setting
parameter to Auto, this parameter
specifies the auto-assigned interrupt for
the onboard VGA controller installed in
your system.
When you set the PCI IRQ Setting
parameter to Manual, you need to specify
the interrupt that you want to assign for
the onboard VGA controller installed in
your system.
Setting this parameter to Yes allows you to
assign the same IRQ to two different
devices. To disable the feature, select No.
Note: If there are no IRQs available to
assign for the remaining device function,
it is recommended that you enable this
parameter.
4 BIOS Setup utility
Option
User input
User input
Yes
No
Advertisement
Table of Contents
