Scanning Software Does Not Operate Correctly; Cannot Start Epson Scan 2 - Epson WF-C20590 User Manual

Parent topic:

Scanning Software Does Not Operate Correctly

If your scanning software does not operate correctly, try these solutions:
• Make sure your computer has adequate memory and meets the system requirements for your
operating system.
• Make sure your computer is not running in a power-saving mode, such as sleep or standby. If so,
wake your system and restart your scanning software.
• If you upgraded your operating system but did not reinstall your scanning software, try reinstalling it.
• In Windows, make sure your product is listed as a valid device.
Parent topic:
Related references
Windows System Requirements
Mac System Requirements
Related tasks
Uninstalling Product Software - Windows
Uninstalling Product Software - Mac

Cannot Start Epson Scan 2

If you cannot start Epson Scan 2, try these solutions:
• Make sure your product is turned on and any interface cables are securely connected at both ends.
• Make sure Epson Scan 2 is selected as your scanning program.
• Make sure your computer is not running in a power-saving mode, such as sleep or standby. If so,
wake your system and restart Epson Scan 2.
• Check the connection setting and test the connection using Epson Scan 2 Utility:
Windows 10: Click
selected. If necessary, select the Other tab and click Reset.
Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility. Make sure the correct
product is selected. If necessary, select the Other tab and click Reset.
Solving Problems
Solving Scanning Problems
and select EPSON > Epson Scan 2 Utility. Make sure the correct product is
356