Human Sensor (Energy Saving); Powerful Operation - Fujitsu ASG30LMTA Service Instruction

24. HUMAN SENSOR (Energy Saving)

•
About the ENERGY SAVING Operation
If no one enters the room for approximately 20 minutes, the set temperature
will be automatically controlled.
(When someone comes back into the room, the human sensor will detect this,
and automatically revert to the original settings.)
(Table 28)
Operation mode
Cool / Dry
Heat
Auto
Application range is follows.
Vertical angle 90
ENERGY SAVING function may not work when the room temperature is very
different from the temperature defined in temperature setting,
such as when immediately after starting the operation
About the HUMAN SENSOR
• Details about detection with the human sensor
• The human sensor detects whether there are people in the room
by looking for movement by people in the room.

25. POWERFUL OPERATION

The Powerful operation functions by pressing POWERFUL button on the remote controller.
The indoor unit & outdoor unit will operate at maximum power as shown in Table 18.
(Table 29)
COMPRESSOR FREQUENCY
FAN CONT. MODE
SETTING LOUVER
Release Condition is as follows.
[Cooling / Dry]
- Room tenperature < Setting temperature - 0.5°C or Operation time has passed 20 minutes.
[Heating]
- Room tenperature > Setting temperature +0.5°C or Operation time has passed 20 minutes.
AMP Air Conditioning
Operation details
(if there is no one in the room for a while)
The set temperature will be increased by
a maximum of approximately 2
The set temperature will be decreased by
a maximum of approximately 4
This runs the ENERGY SAVING function
automatically for the selected mode
(Cooling/ Heating/ Drying)
(Side view)
°
Powerful operation
Maximum
Powerful
Cooling/ Dry : 3, Heating : 5
=
=
°C.
°C.
Horizontal angle 100
°(Top view)
01-23
www.ampair.co.uk | sales@ampair.co.uk
* High limit : 30
°C
* Low limit : 16
°C