Whirlpool RJE-395P Use And Care Manual page 9

The optional rotisserie
If you would like a rotisserie with your oven, you can order a kit
(Part No. 261881) from your dealer. Easy installation instructions come
with the kit
Using the Self-Cleaninn oven cvcle
The Self-Cleaning Oven uses high heat that actually burns away
coven soil For best results and safety, read this section carefully. Make sure
vou understand how everything works before you set your oven to
'CI .EAN "
Things to do before you start:
l
Some areas may not be cleaned during the Self-Cleaning cycle,
--The frame around the oven opening
-The door tjspeclally the part around the outslde of the oven seal.
SolI on these areas will be more difficult to remove after the Self-
CleanlIly cycle Use jhot water and detergent. or a soapy steel-wool
pad Rlnsc well
l
Do not move or bend the fiberglass oven door seal. Do not try to
clean it by hand.
l
The high heat during the cleaning cycle will discolor the racks and
rake the shine off them if they are left in the oven during the Self-
Cleaning cycle If you want your oven racks to stay shiny and bright.
take them out before starting the cleaning cycle If you do clean the
racks dunny the cleaning cycle. read the "Special Tips" at the end of
!hls section
0 Don't leave any pots or pans In the oven during cleaning They won't
be ablr to stand the high heat
l
Wipe up spAlovers. bollovers and grease that hasn't baked onto the
bottom of the (ove'n This WIII help reduce smoking during the cleaning
(.VClt!
l
T&c porcElaln reflector bowls may 'be cleaned in the oven Put the
oven racks on the second and top rack guides Wipe the reflector
bowls and put twc) reflector bowls
upside down
on each rack For best
results. thrv should not touch each other or the oven walls
Chrome
trim rings must not be cleaned in the oven.
l
TLlrn on the vent hood fan or other kitchen vents during the cleaning
cycle Thai ikill hell-, remove smoke. odor and heat that are normal
durlny tht> qcle
l
Ii you have) a rotlsst'ne. be sure the motc)r socket cover is closed.
Setting the controls to the Self- Cleaning cycle:
1. Set the Oven Selector Knob 2. Set the Oven Temperature
to "CLEAN."
Control Knob to "CLEAN."
9