Chigo SA-ZM03ENG-1 Instruction Manual page 8

Wind direction key: The wind direction is set as winging state in default during first time power on; press this
key and it will circulate in sequence of "Swing → Stop → Swing".
Wind speed key: The wind speed is set at automatic wind speed in default during first time power on; in
dehumidification mode, the speed wind is fixed as low speed and can not be adjusted; it will have no response
when pressing the wind speed key.
"Automatic wind → High speed wind → Medium speed wind → Low speed wind → automatic wind".
Timing key: Set at non-timing state in default; press this key for timing setting in unit of 1 hour in the sequence
of "1 H→2 H→...→24 H→ cancellation →1 H...".
setting; press timing setting key to set the timing switch in power ON state. After settingof timing function,
decrease every 1 hour till reached the setting time when it will power on or off, and cancel the timing display. If
the timing is activated, the timing will not be canceled if pressed mode key. If the timing is activated, pressing
of other key will send the setting time.
Forced key:The remote controller is set of non-forced state in default; in automatic, dehumidification and
ventilation modes, the forced key does no function (no display and no code emitted for force).
this key in other mode, the forced mode will circulate between ON and OFF. The wind speed does not display
if the forced mode is activated; the forced mode will be deactivated after switching themode if it is activated;
the forced mode will be canceled when setting the sleep operation.
Sleep switch: When pressing the sleep key, circulate in sequence of "sleep → cancel sleep → sleep"; if the
sleep mode is activated, it will not be canceled after changed the mode.
the wind speed will automatically switch to low speed, but the pressing of wind speed keycan adjust the wind
speed (except dehumidification mode)
Lock key: It is set as non-lock state in default; when pressing this key, the remote controller circulates in
sequence of "Lock→Cancel lock→Lock".
lock key does no function. (Note: when the lock key is activated, the keys on cabinet unit remote controller and
air conditioner operation panel will automatically lock; when pressing the key again, the remote controller and
air conditioner will automatically unlock.
button will not be locked, but the main plate response.)
Light key: The split unit only locks the remote controller, but does not lock the emergency lock; the main board
will response. It is set as non-lamp state in default; when pressing this key, the remote controllercirculates in
sequence of "Lamp→Cancel lamp→Lamp". If the lamp key is activated, after pressed the mode key, the lamp
key indication will not be canceled.
Purification key: Set as non-purification state in default; when pressing this key, the remote controller will
circulate in sequence of "Purification → Cancel purification → Purification".
purification will not be canceled after pressing the mode key. When pressing this key in power-off mode of
remote controller, it will circulate in sequence of "Purification → Cancel purification → Purification". When o
the purification separately
adjustable .
2.Name of air conditioner components
In other modes, press this key and it will circulate in sequence of
In power off state, press timing setting keyto set power on
If the lock key is activated, all keys of remote controller other than
In discrete unit, only the remote controlleris locked, the emergency
during power-off, swing wind
When pressing the sleepkey to sleep,
If the purification is activated, the
is fixed wind , door is unadjustable, wind speed is
6
When pressing
pen