Subscribe to Our Youtube Channel
Related Manuals for Ameriwood 5947220T
Summary of Contents for Ameriwood 5947220T
- Page 1 Modern night stand style # 5947220T (Espresso) style # 5947306T (White) DPCI # 249-05-0482 (Espresso) DPCI # 249-05-0491 (White) >> assembly instructions B345947220T 00...
-
Page 2: Before You Begin
Congratulations on your latest Target purchase. Now what? Don't start sweating over the box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you'll be on your way to transforming your room in no time. -
Page 3: Table Of Contents
table of contents introduction hardware parts list how to use the cam lock system assembly 8-25 Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number QUESTIONS? ready when calling. -
Page 4: Hardware
hardware (1) x6 (2) x6 (3) x2 (4) x6 (5) x6 (6) x20 cam lock cam bolt wood dowel connector housing connector bolt nail #A22570 #A22510 #A21660 #A22900 (white) #A22910 #A21110 #A22920 (black) (9) x4 (7) x4 (10) x2 (8) x10 drawer bracket #8x1- "... -
Page 5: Parts List
Parts shown are the base cabinet of your model. Please note, Parts List for 5947220T (Espresso) most parts are labeled with a sticker or have a letter stamped on a raw edge. Parts List Parts F, G, H may not be labeled. - Page 6 Parts shown are the base cabinet of your model. Please note, Parts List for 5947306T (White) most parts are labeled with a sticker or have a letter stamped on a raw edge. Parts List Parts F, G, H may not be labeled. ITEM PART NUMBER DESCRIPTION...
-
Page 7: How To Use The Cam Lock System
how to use the cam lock system Tighten to fully seat. Do not over tighten. Proper orientation of cam. ½ turn to fully lock. Lock... - Page 8 step Proper orientation of CAM LOCK finished edge (11) x3 (1) x2 (3) x1 (13) x1 cam lock " screw wood dowel left cabinet slide marked with an "L" 1. Refer to page 7 for instructions on how to use the cam lock system.
- Page 9 step Proper orientation of CAM LOCK finished edge (11) x3 (1) x2 (3) x1 (13) x1 cam lock wood dowel " screw right cabinet slide marked with an "R" 1. Refer to page 7 for instructions on how to use the cam lock system.
- Page 10 step (2) x4 cam bolt 1. Screw-in cam bolts must be screwed down flush. 2. Refer to page 7 for instructions on how to use the cam lock system.
- Page 11 step (5) x6 connector bolt...
- Page 12 step finished edge finished edge (9) x4 #8x1- " pan head screw...
- Page 13 step finished edge UNLOCK LOCK 1. Refer to page 7 for instructions on how to use the cam lock system.
-
Page 14: Assembly
step Do not fully tighten the screws. Some adjustment may be necessary later during the assembly. (8) x3 (12) x3 " pan head screw angle bracket... - Page 15 step Once the apron is fastened, tighten all screws. (8) x3 " pan head screw Please Notice: The Right Panel is not shown for clarity of attaching angle bracket to Right Panel. 1. For this step installing the Apron, place unit on it's top as shown.
- Page 16 step IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. WARNING Please make sure that the Back Panel is attached securely. All nails must be driven into the parts straight and centered. Failure to do so could cause instability, product collapse, and/or serious injury.
- Page 17 step You will need to tap the connector (4) with a hammer (4) x6 to fully insert. Be sure the connector is positioned as (1) x2 (2) x2 shown before pushing into holes. connector housing cam lock cam bolt 1. Screw-in cam bolts must be screwed down flush. 2.
- Page 18 step UNLOCK LOCK 1. Refer to page 7 for instructions on how to use the cam lock system.
- Page 19 step Turn connector screw clockwise to lock in place.
- Page 20 step Bracket Orientation Bracket Orientation (10) x2 drawer bracket 1. Lay the drawer sides down on a flat hard surface. Carefully line up the drawer bracket with the holes in the drawer side as shown. Using a hammer, tap each drawer bracket stem part way into each hole. Repeat this process until the drawer bracket is fully seated on the drawer side.
- Page 21 step line up all grooves during assembly (8) x4 " pan head screw...
- Page 22 step finished surface 1. Slide drawer bottom into grooves in drawer sides. Make sure finished surface is facing up.
- Page 23 step (7) x4 #6x1- " flat head screw...
- Page 24 step marked with an "L" marked with an "R" (11) x4 (13) x1 (13) x1 #6x7/16" flat head screw left drawer slide right drawer slide...
- Page 25 step roller cabinet member drawer runner roller Notice, the drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. 1. Tip the drawer as shown to insert drawer runner rollers into cabinet members.
- Page 26 MAXIMUM LOADS This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television.
- Page 27 Certificate of Conformity 1. This certificate applies to the Ameriwood Industries Inc. product identified by this instruction manual. 2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303). 3. This product is distributed by: Ameriwood Industries Inc.
- Page 28 ©2016 Target. The Bullseye Design is a trademark of Target Brands inc. All rights reserved.
Need help?
Do you have a question about the 5947220T and is the answer not in the manual?
Questions and answers