Superior WRE3042WS Installation And Operation Instructions Manual page 20

Canadian code CAN/ULC-S610-M87 and other pertinent
codes require stainless steel chimney for the installation
of this ireplace. A Cold Air Climate Kit is also required
in Canada and is recommended for cooler regions in the
United States. Below, find a list of approved stainless
steel parts.
Chimney Parts List for Canada
Catalog 8" Hi-Temp
Model No.
No. Wood burning Chimney
12-8HT 12" Section Hi-Temp Double
F0881
Wall Pipe Snap Lock
18-8HT 18" Section Hi-Temp Double
F0882
Wall Pipe Snap Lock
24-8HT 24" Section Hi-Temp Double
F0883
Wall Pipe Snap Lock
36-8HT 36" Section Hi-Temp Double
F0884
Wall Pipe Snap Lock
48-8HT 48" Section Hi-Temp Double
F0885
Wall Pipe Snap Lock
30E-8HT 30 Degree Hi-Temp Offset
F0886
and Return
12S-8HT Hi-Temp Chimney Support
F0887
(For Use With Chimney
Heights In Excess of 30')
RT-8HT Hi-Temp Round Top with
F0888
Mesh Screen
RTT-8HT* Hi-Temp Round Top with
F0889
Mesh Screen and Slip Sec-
tion
RLT-8HT Hi-Temp Round Top with
F0890
Louvered Screen
RLTT-8HT* Hi-Temp Round Top with
F0891
Louvered Screen and Slip
Section
ET-8HT* Hi-Temp Pyramid Top with
F0892
Slip Section
ETL-8HT* Hi-Temp Large Pyramid Top
F0893
with Slip Section (use with all
8" systems)
AP-8HT Hi-Temp Anchor Plate/Col-
F0894
lar Assembly (for masonry
ireplaces)
CAK-8 Cold Air Collar Kit - 8"
F0929
Chimney
*When ordered alone, this part cannot ship via parcel
delivery services.
20
IMPORTANT NOTICE
A manufactured shroud which
has been approved by a na-
tional testing agency for use
with this fireplace may be used
if installed in accordance with
the instructions by its manu-
facturer. A locally fabricated
shroud may be used with IHP
Shroud Leg Spacer Kit (SLK)
in accordance with instructions
provided with the shroud.
Superiorfireplaces.US.com
NOTICE: The firebox canopy (hood)
must not be modified or replaced with
a canopy that may be provided with
the unvented decorative room heater.
CAUTION: THE STRUCTURAL INTEG-
RITY OF THE MANUFACTURED HOME
FLOOR, WALL, AND CEILING/ROOF
MUST BE MAINTAINED.
WARNING: DO NOT INSTALL
IN SLEEPING ROOM OF MOBILE
HOMES.
127055-01E